22
INSTALLATION
IMAX XTRA EL
-
Installation & Servicing
21 IMAX XTRA EL USER INTERFACE - BASIC OPERATING INSTRUCTIONS
Ideal imax XL 320 kW
Normal Operation
Set Flow Temp’
Set DHW Temp’
SETTING FLOW TEMPERATURE
Ideal imax XL 320 kW
Normal Operation
Set Flow Temp’
Set DHW Temp’
Set Off/Sum/Win
Rotate the KNOB clockwise until a screen similar to the following
is displayed
Set Flow Temp’
80°C
Press SELECT and a screen similar to the following will be displayed
Press + and - to change to the required setting and then press
ENTER to store.
Rotate the KNOB anti-clockwise until Normal Operation is
highlighted again and press SELECT to return to normal operation.
continued . . . . . . . .
Press SELECT and a screen similar to the following will be displayed
The kW output number in the 1st line will vary depending on the
maximum output of the boiler.
Note that DHW Temperature can only be set if a DHW Thermistor
has been connected to the boiler and the boiler configured for its use.
Without a DHW thermistor the flow temperature for the DHW switched
live input will be controlled to the DHW Temperature Se4ºC.
Press SELECT and a screen similar to the following will be displayed.
The kW output number in the 1st line will vary depending on the
maximum output of the boiler.
Ideal imax XL 320 kW
Normal Operation
Set Flow Temp’
Set DHW Temp’
Ideal imax XL 320 kW
Set Flow Temp’
Set DHW Temp’
Set Off/Sum/Win
Out’ Sensor Slope
Rotate the KNOB clockwise until a screen similar to the
following is displayed
Set DHW Temp’
65°C
Press SELECT and a screen similar to the following will be displayed
SETTING DOMESTIC HOT WATER TEMPERATURE
Press + and - to change to the required setting and then press ENTER
to store.
Rotate the KNOB anti-clockwise until Normal Operation is highlighted
again and press SELECT to return to normal operation.
Ideal imax XL 320 kW
Normal Operation
Set Flow Temp’
Set DHW Temp’
Press SELECT and a screen similar to the following will be displayed
The kW output number in the 1st line will vary depending on the
maximum output of the boiler.
Ideal imax XL 320 kW
Set DHW Temp’
Set Off/Sum/Win
Out’ Sensor Slope
Normal Operation
Rotate KNOB clockwise until a screen similar to following is displayed
Set Off/Sum/Win
Standby
Summer
Winter
Press - for more
Press SELECT and a screen similar to the following will be displayed
Press + and - to change to required setting, press ENTER to store.
Rotate the KNOB anti-clockwise until Normal Operation is highlighted
again and press SELECT to return to normal operation.
SETTING SUMMER, WINTER AND STANDBY OPERATION
Note that Standby Mode will disable Domestic Hot Water and
Central Heating, Summer Mode will disable Central Heating.
SETTING THE OUTSIDE SENSOR SLOPE
Note that an Outside Sensor must be fitted to the boiler for this feature
to be active (this will be detected automatically).
Press SELECT and a screen similar to the following will be displayed.
The kW output number in the 1st line will vary depending on the
maximum output of the boiler.
Ideal imax XL 320 kW
Normal Operation
Set Flow Temp’
Set DHW Temp’
Rotate KNOB clockwise until a screen similar to the following is displayed
Ideal imax XL 320 kW
Set Off/Sum/Win
Out’ Sensor Slope
State of Inputs
State of Outputs
Press SELECT and a screen similar to the following will be displayed
Out’ Sensor Slope
1.5
Note that a higher number gives a higher room temperature and a
lower number gives a lower room temperature.
Press + and - to change to required setting, press ENTER to store.
Rotate the KNOB anti-clockwise until Normal Operation is
highlighted again and press SELECT to return to normal operation.
INST
ALLA
TION
