Ideal Boilers Buccaneer GTE 5, Руководство по установке и обслуживанию

Страница: 15 / 40

15 Buccaneer GTE -
Installation & Servicing
INSTALLATION
buc7938
1
2
19 INSTALLING THE CONTROL PANEL
1. Lift the window.
2. Slide the control panel into the opening.
20 FIXING THE CONTROL PANEL
1. Fix the back of the control panel on the
top of the boiler using the 3.9 x 12 self
tapping screw and plain washer.
2. Lift the control panel display forwards.
3. Fix the lower front part of the control panel
on the cross bar using two M3 x 16
screws and square nuts.
4. Replace the control panel display.
5. Fix the top part of the control panel using
the black screw for plastic supplied for
this purpose.
6. Fit the earth wire spade connector to the
earth tab.
21 ROUTING THE BURNER CABLE
1. Put the burner cable in the
grommet, (supplied in the
control panel instructions
pack).
2. Install the grommet and the
burner cable into the notch in
the control panel support on
the side opposite the hinges
of the burner door, (left side).
If the direction of the opening
of the burner door has been
reversed, it will be on the right
side.
2
1
buc5505
2
3
4
3
5
1
BUC7947
6
INST
ALLA
TION