ViVOpay Vend 3 User Guide
8
Installing the ViVOpay Vend 3
• Firmware version screen
The reader should then display
Welcome
or
Please present card
or similar wording, depending
upon the POS application.
If the reader fails to power up, try reseating the power connector (or change to a different power
outlet). For more troubleshooting information, see
“Troubleshooting” on page 13
.
Connect Ethernet
To connect to Ethernet
1. Insert a CAT5 or better cable into the Ethernet port.
2. Connect the other end of the Ethernet cable to an Ethernet switch or hub.
