Unlocking a Door
The
[FUNCTION]
can be used to unlock a specific door from the keypad. Depending on your installation, you may
be able to do this without logging in to the keypad, or you may be required to enter your PIN, and then press the
[FUNCTION]
key.
Panic Alarms
The Protege system provides a panic alarm that is immediately generated after two specific buttons are pressed
and held for three seconds. Based on your needs, the panic alarm may generate
audible
alarms (sirens or bells) or
silent
alarms, and communicate specific messages to your monitoring station or property manager.
⦁
Press and hold
[1]
and
[3]
for the
panic
alarm.
Fire Alarms
When a fire alarm occurs, the keypad emits three audible tones at 2 second intervals until it is reset by entering a
valid user code. If the input is a
delay fire input
, there is a 30 second delay before the system contacts the security
company or property manager, preventing the reporting of false alarms. If there is no fire condition, we
recommend you contact your property manager or security company immediately to avoid an unnecessary
response.
A delayed fire input is automatically canceled if the smoke detector is reset within 30 seconds. Pressing any key on
the keypad during the first 30 seconds will silence the alarm for 90 seconds.
Disabling / Enabling the Audible Output
Disabling the audible tone on your keypad will prevent the beeper from generating any notifications for alarms,
exit delay, or entry delay. This also disables rejection, confirmation and key press tones.
Disabling the Audible Output
1.
To disable the audible output, press and hold
[CLEAR]
.
2.
The keypad will generate one long audible tone (rejection tone) to signify that the audible output has been
disabled.
Enabling the Audible Output
1.
To enable the audible output, press and hold
[CLEAR]
.
2.
The keypad will generate four audible tones to indicate that the audible output has been enabled.
PRT-KLCD | Protege Alphanumeric LCD Keypad | User Manual
23
