Logging in to the Keypad
When logging in to a keypad, the exact process, messages displayed and menus accessible will depend upon your
site and user configuration. Discuss with your installer which options have been configured for your site.
Single Credential Login
1.
To log in, enter your
PIN
code and press
[ENTER]
.
Once a valid PIN is entered you will be presented with a welcome screen, area status or available menu.
Dual Credential Login
1.
To log in using dual credential authentication, enter your
User ID
credential code and press
[ENTER]
.
2.
When prompted, enter your
PIN
code and press
[ENTER]
.
Once a valid PIN is entered you will be presented with a welcome screen, area status or available menu.
If the
Lock Keypad On Excess Attempts
option has been enabled on your system, entering an invalid login three
times will lock the keypad for a short period, preventing further login attempts by any user. The lockout time is
defined under the keypad programming.
Logging Out
You are automatically logged out after a short period of inactivity, or if the
[CLEAR]
key is pressed while you are
logged in.
The period of inactivity is defined by the
Time User is Logged In
setting under the keypad programming. If no
key presses are detected during this time, you will be logged out automatically and will need to log in again
before you can proceed.
PRT-KLCD | Protege Alphanumeric LCD Keypad | User Manual
9
