36
Innovative Circuit Technology Ltd.
Select the Alarm Reporting
Send E-mail
checkbox to configure the system to
send an e-mail to the address set up on the communications page whenever an
alarm is triggered on the integrated DC output converter module.
Alarms
Click on the
Alarms
tab to review the status and alarm history of the unit.
Click on the
SETTINGS & CONTROL
tab to set up the four remote alarm
monitoring inputs.
Alarm Name:
Give each input a meaningful name to suit the installation
(these will be used for e-mailed alarm messages
Contact Type:
select a Contact Type of either Normally Open (NO) or
Normally Closed (NC) for each device to be monitored. Set alarm Contact
Type to Not Used for all unused alarm input channels (default setting).
Configure how you would like to be notified of the alarms. Select the
Activate
Form-C Contact
check box (default) to have the back panel alarm contacts
change state for an alarm condition, and/or select the
Send E-mail
check box to
have an alarm e-mail sent to the e-mail addresses set up on the
communications page.
