16
Innovative Circuit Technology Ltd.
Connect a separate AC power cord to each shelf, using independent AC circuits
rated for the full power operation of each shelf.
OPERATION (Front Panel)
Switch on the external AC power source circuit breaker, and check that the
green POWER LED is lit on each power module, and that the ICM front graphic
display is lit.
Your Hybrid Power Series will start up and operate at the factory default
settings when AC power is connected, generally requiring no other set up or
adjustment for basic operation.
Use the web-GUI or the front graphic display on the ICM to monitor the unit
operation and to make changes to settings such as output voltage, current limit,
and battery low voltage disconnect points. (The display will go off after
approximately 60 minutes of no use, and can be re-activated by momentarily
pressing any of the front control buttons.)
Figure 9: ICM Front Control Interface
–
System Status Screen
The ICM Interface panel consists of the following elements:
System Display screen:
Default System Status screen shown in Figure 9 displays
the shelf output voltage, the AC input voltage, and the total output current.
(Numerically, and with a graphical indication of relative magnitude of system
output current level) The screen will also show any active alarm conditions, and
the current reading will flash to indicate when the unit is operating at its current
limit.
Up/Down
Buttons:
Use to scroll through display screens, and to adjust
selected settings
Enter Button:
Press to select a screen for adjustment, or to enter a new
value after adjustment
Back
X
Button:
Press to return to the previous higher level menu item, or to
exit from a setting without making any change
