ICP ICP9014RO, Инструкция по установке и эксплуатации

Страница: 90 / 142

C-1
C
ICP Flash Utility (IFU)
In this Appendix...
Introduction
The ICP Flash Utility (IFU) is a DOS utility used to update, save, or
verify the RAID controller’s firmware BIOS, and NVRAM.
Caution: The IFU is easy to use and contains safeguards to
prevent you from accidentally damaging the controller’s flash
contents. Still,
you must be careful to use the IFU correctly ,
otherwise, you could render the controller inoperable.
Note:
If you are updating multiple controllers in the same
system, first update the boot controller’s flash, and then update
the flash for the remaining controllers.
Introduction C-1
Creating the Firmware Floppy Disks C-3
Running the IFU from the GUI C-4
Running the IFU from the Command Line C-5
!