ICP ICP9014RO, Инструкция по установке и эксплуатации

Страница: 30 / 142

2-6
Installing the Controller and Drives
13 A cache warning message is displayed. Type Y .
A Creating Array window appears.
14 Once the array is created, a message displays telling you that
the array can now be used. Press any key to return to the ACU
Menu.
Note: Although you can start using the array immediately,
performance is reduced until the build process is complete.
15 Press Esc until the Exit Utility window appears.
16 Highlight Yes , then press Enter .
The computer restarts.
17 Install the driver as described in Chapter 3 .
Using the Installation CD
Note: You cannot create the RAID using a CD drive connected
to the RAID controller.
To build a bootable RAID 5 array using the installation CD:
1
Install the controller and drives, as described in Installing the
Controller and Drives on page 2-2 .
2
Start or restart the computer.
3
Insert the installation CD.
Note: If the installation CD does not start automatically,
you may need to enter system setup and enable booting
from the CD. For details, refer to your computer’s
documentation.
Write Caching Press Enter (Enable always).
Create RAID via Press Enter (Build/Verify).
[Done] Press Enter .
Property Line Displayed Entry or Selection