2-7
Installing the Controller and Drives
4
Select the appropriate language on the Language screen, then
press
Enter
. Read the Licenses screen, then press
Enter
again.
The installation CD main menu is displayed.
5
Select
Launch Configuration Utility
.
The system launches ICP Storage Manager. The ICP Storage
Manager screen appears similar to the following.
6
Click
Create
.
7
In the configuration wizard, select
Custom
.
8
Click the
RAID 5
button, then click
Next
.
9
Click at least three drives to be used in your array.
Each drive you select is marked with a check.
10
Click
Next
.
11
Type the name you want to assign to the RAID 5 you are
creating, then click
Apply
.
The system creates the array. The display refreshes to show the
newly-created RAID 5 on the right side of the display. You can
use the array immediately. However, if you want to make the
array bootable you must allow the array to finish building
before restarting the system.
12
When you are ready to continue, close all windows.
The Main Menu is active.
13
Click
Reboot
to restart your system.
14
Remove the installation CD.
15
If you want to make the array bootable, do so now using the
ICP RAID Configuration Utility. For details, see
