ICP ICP9014RO, Инструкция по установке и эксплуатации

Страница: 92 / 142

C-3
ICP Flash Utility (IFU)
Creating the Firmware Floppy Disks
Controller firmware is available two ways:
■
From the controller installation CD —The CD includes the IFU
executable,
IFU.exe
. The flash image may be comprised of
multiple UFI files.
You can locate the necessary files on the controller installation
CD at the locations listed below.
■
From the ICP Web site —When you download a new firmware
file, you usually get the most recent version of IFU.
To create the firmware floppy disks:
1
Create a bootable MS–DOS floppy disk and copy the following
files to this disk:
– IFU.exe
– AA xxx 01.ufi
where
xxx
is the model number of your controller.
2
Create additional bootable MS–DOS floppy disks and copy each
additional
AA xxx 0x.ufi
files to a separate disk. (Some controllers
have two UFI files; others have four.)
3
Start the IFU as described in Running the IFU from the GUI on
page C-4 and follow the prompts.
ICP Model Path
ICP9014RO /packages/firmware/ICP9014RO
ICP9024RO /packages/firmware/ICP9024RO