PIO-D96 Series Card
96-channel DIO Board
User Manual, Ver. 2.3, Jun. 2018, PMH-008-23 Page: 35
We provide all necessary functions as follows:
1.
PIO_DriverInit
(&wBoard, wSubVendor, wSubDevice, wSubAux)
2.
PIO_GetConfigAddressSpace
(wBoardNo,*wBase,*wIrq, *wSubVendor,*wSubDevice, *wSubAux,
*wSlotBus, *wSlotDevice)
3.
Show_PIO_PISO
(wSubVendor, wSubDevice, wSubAux)
All functions are defined in PIODIO.H. Refer to
Section 6.3 “The I/O Address Map”
for more
information. The important driver information is given as follows:
Allocated resource information:
•
wBase :
BASE address mapping in this PC
•
wIrq:
Allocated IRQ channel number of this board in this PC
PIO/PISO identification information:
•
wSubVendor:
subVendor ID of this board
•
wSubDevice:
subDevice ID of this board
•
wSubAux:
subAux ID of this board
PC’s physical slot information:
•
wSlotBus:
The bus number of the slot used by this board.
•
wSlotDevice:
The device number of the slot used by this board.
The PIO_PISO.EXE utility will detect and show all PIO/PISO cards installed in this PC. Refer to
“PIO_PISO.EXE Utility”
for more information.
