![background image](http://html1.mh-extra.com/html/icp-das-usa/pio-d96/pio-d96_user-manual_4476333017.webp)
PIO-D96 Series Card
96-channel DIO Board
User Manual, Ver. 2.3, Jun. 2018, PMH-008-23 Page: 16
3.
Hardware Installation
Note:
It is recommended that the driver is installed before installing the hardware as the computer may need to be
restarted once the driver is installed in certain operating systems, such as Windows 2000 or Windows XP, etc.
Installing the driver first helps reduce the time required for installation and restarting the computer.
To install your PIO-D96 series card, follow the procedure described below:
Step 1:
Install the driver for your board on Host computer.
For detailed information about the driver
installation, please refer to
Chapter 4
“Software Installation”.
Step 2:
Configure the Card ID using the DIP Switch (SW1).
For detailed information about the card ID (SW1), please refer to
Section 2.3 “Card ID Switch”.
Note
The Card ID function is only supported by the PIO-D96U/D96SU and PEX-D96S.