![background image](http://html1.mh-extra.com/html/icp-das-usa/pio-d96/pio-d96_user-manual_4476333030.webp)
PIO-D96 Series Card
96-channel DIO Board
User Manual, Ver. 2.3, Jun. 2018, PMH-008-23 Page: 29
5.
Board Testing
This chapter provides detailed information about the
“Self-Test”
process, which is used to confirm
that the PIO-D96 series board is operating correctly. Before beginning the
“Self-Test”
process,
ensure that both the hardware and driver installation procedures are fully completed. For detailed
information about the hardware and driver installation, refer to
Chapter 3 “Hardware Installation”
and
Chapter 4 “Software Installation”.
5.1
Self-Test Wiring
5.1.1
PIO-D96/D96U
Before beginning the
“Self-Test”
procedure, ensure that the following items are available:
A CA-3710 Cable
(Optional, Website:
http://www.icpdas.com/products/Accessories/cable/cable_selection.htm
)
A DN-37 Terminal Board
(Optional, Website:
http://www.icpdas.com/root/product/solutions/pc_based_io_board/daughter_boards/dn-37.html
)
Step 1:
Connect the DN-37 to the CN1 connector on your board using the CA-3710 cable.
PIO-D96/D96U