ICP DAS USA M-7024 Скачать руководство пользователя страница 55

Страница: 55 / 187

I-7021/22/24, M-7022/24/28 User Manual, Rev: B2.3

Response:

Valid Command:

!AA[CHKSUM](CR)

Invalid Command:

?AA[CHKSUM](CR)

Delimiter for a valid command

Delimiter for an invalid command. If the

Baud

Rate

checksum

settings are changed without

connecting the INIT* terminal to ground, the
module will return an invalid command.

Address of the module in hexadecimal format (00

to FF)

There will be no response if the command syntax is
incorrect, there is a communication error, or there is no
module with the specified address.

Examples:

Command: %0102300600

Response: !02

Changes the address of module 01 to 02. The module
returns a valid response.

Command: %0101300A00

Response: ?01

Changes the Baud Rate of module 01 to 115200bps.
The module returns an invalid command, because it
is not in INIT* mode.

Command: %0101300A00

Response: !01

Changes the Baud Rate of module 01 to 115200bps
and the module is in INIT* mode. The module
returns a valid response.

I-7021, I-7021P, I-7022, I-7024, I-7024R
M-7022, M-7024, M-7024L, M-7024R, M-7024U, M-7028

Содержание M-7024




























































































































































































Результаты поиска

Содержание M-7024

Отзывы:

Бренды по названию

Популярные бренды

ICP DAS USA M-7024, Руководство пользователя

Результаты поиска

Содержание M-7024

Отзывы:

Бренды по названию

Популярные бренды