ICP DAS USA ET-2200 Series, Руководство пользователя

Страница: 88 / 125

ET-2200 Series Ethernet I/O Modules
Copyright © 2020 ICP DAS CO., Ltd. All Rights Reserved. -88 -
Step 4: Configure the I/O Pair connection on the ET-2260 #2 module
1. In the eSearch Utility, select ET-2260 #2 module and then click the “ Web ” button to launch the
browser program and connect to the web server.
2. Enter the password in the Login password field (the default password is “Admin”) , and then
click the “Submit” button to display the configuration page.
3. Click the “Pair ” tab to display the I/O Pair-connectionSettings page.
Refer to Figures 5-1.3 to 5-1.4 for illustrations of how to perform the above procedure.
4. In the “I/O Pair-connection Settings”, select “PUSH” from the “ Mode ” drop-down options.
5. Enter the IP address for ET-2260 #1 module in the “ Remote IP ” field.
6. Enter the TCP Port for ET-2260#1 module in the “ Remote Port ” field.
7. Enter a DI Count Value for ET-2260 #2 module in the “ DI Count ” field (Local DI to Remote DO).
For example, enter “1” in the “DI Count” field. This means DI x1 of ET-2260 #2 module is mapped
to DO1 x of ET-2260 #1 module .
8. Select Modbus protocol (e.g., “TCP”) from the “TCP/UDP” drop-down options.
9. Click the “ Submit ” button to complete the configuration.
Figure 5-2.4