ICP DAS USA ET-2200 Series, Руководство пользователя

Страница: 42 / 125

ET-2200 Series Ethernet I/O Modules
Copyright © 2020 ICP DAS CO., Ltd. All Rights Reserved. -42 -
General Settings
The following table provides an overview of the parameters contained in the General Settings
section:
Item Description
Ethernet Speed
This parameter is used to set the Ethernet speed. The default value is Auto (Auto
= 10/100 Mbps Auto-negotiation).
System Timeout
(Network Watchdog)
This parameter is used to configure the system timeout value. If there is no
activity on the network for a certain period of time, the system will be rebooted
based on the configured system timeout value.
TCP Timeout (Seconds)
This parameter is used to configure the TCP timeout value. If Modbus TCP
communication is idle for a certain period of time, the system will cut off the
connection.
UDP Configuration This parameter is used to enable or disable UDP configuration function.
Web Auto-logout
This parameter is used to configure the automatic logout value. If there is no
activity on the web server for a certain period of time, the current user account
will automatically logged out.
Alias Name
This parameter is used to assign an alias name for each ET-2200 module to assist
with easy identification.
HTTP Port
This parameter is used to assign specific a HTTP port of ET-2200 module. The
ET-2200 needs to be restarted when the HTTP port is changed. You need
manually type the new HTTP port in the address bar of the browser. The default
is 80.
For example: if the HTTP port is set to 81, then enter the “IP address: HTTP port”
(10.0.8.123:81).
Update Settings Click this button to save the revised settings to the ET-2200 module.