ICP DAS USA ET-2200 Series, Руководство пользователя

Страница: 84 / 125

ET-2200 Series Ethernet I/O Modules
Copyright © 2020 ICP DAS CO., Ltd. All Rights Reserved. -84 -
3. Click the “Pair ” tab to display the I/O Pair-connection Settings page.
Pull Mode
4. In the “I/O Pair-connection Settings”, select “PULL” from the “ Mode ” drop-down options.
5. Enter the IP address for ET-2260 #2 module in the “ Remote IP ” field.
6. Enter the TCP Port for ET-2260#2 module in the “ Remote Port ” field.
7. Enter a DI Count Value for ET-2260 #2 module in the “ DI Count ” field (Remote DI to Local DO).
The following is an example of a Pull mode configuration:
Enter “2” in the “DI Count” field. This means DI x2 of ET-2260 #2 module is mapped to DO x2 of
ET-2260 #1 module .
8. Click the “ Submit ” button to complete the configuration.
Figure 5-1.5
Figure 5-1.4