Product Overview
6
LED Type
Type
Colour State
Description
N/A
Off
CATV disabled
Green
Solid
CATV configured and enabled, signal OK
CATV
CATV status
Red
Solid
CATV configured and enabled, signal too low (-10.5
dBm) or unavailable
Note
The LED panel brightness and auto off timeout can be adjusted from the web interface. For
instructions on how to do this, see Managing the LED settings in the Managing the user
settings and configuration section.
Connectors
The Icotera IGW3000 front panel includes all the local user connectors that are four RJ-45
10Base-T/100Base-TX/1000Base-T ports, two USB ports, two POTS phone ports and one F-
type CATV RF output port. Optical fiber connectors are placed inside the device.
Power Port
The power port accepts DC 12V power source. It is important to make sure that the proper power
adapter is suitable to a particular region.
On/Off Switch
The On/Off switch enables you to switch the IGW3000 on or off, as well as reboot the IGW3000
and restore the last saved configuration.
Reset Button
The Reset button enables you to reboot the IGW3000 and restore the default configuration. In
order to do this, it needs to be pressed for about 5 seconds.
Serial Number
The serial number of the Icotera IGW3000 consists of 14 digits. The format of the serial number
is PPPPWWYYXXXXXX, where PPPP is the project ID, WW is the production week, YY is the
production year, and XXXXXX is the running serial number.
