Configuring and managing the IGW3000
28
Monitoring the IGW status and performance
The Status menu provides a set of tabs that can be used to monitor the status and performance
of the IGW interfaces and services. This section briefly describes the purpose and content of
each of these tabs.
Displaying system status information
To access the system status information, click Status > System. The System tab will be
displayed, showing the following system status information:
• CPE Model: CPE product name.
• Serial Number: unique serial number of the CPE.
• Firmware version: firmware version currently installed in the CPE.
• Uptime: time since last CPE reboot.
• Interface MAC addresses: WAN MAC, LAN MAC, Wireless MAC 1 (if set in the CPE) and
Wireless MAC 2 (if set in the CPE).
Figure 20. System tab in the Status menu
