Configuring and managing the IGW3000
30
Monitoring the WAN interface bandwidth
To access the WAN interface bandwidth information, click Status > WAN > Bandwidth. The
Bandwidth tab of the WAN menu will be displayed and the WAN interface bandwidth graph will
be rendered along with the current incoming and outgoing traffic indicator in KB/s or Kbps. In
order to switch between bits and bytes per second, use the Switch to option above the graph.
Figure 22. WAN > Bandwidth tab in the Status menu
Monitoring the LAN interface
To access the LAN interface information, click Status > LAN. The LAN tab will be displayed,
showing the LAN interface information grouped into areas, each of which refers to a particular
LAN interface. This information is grouped into the following sections:
• IP Info: contains LAN interface IP and MAC address information.
• Link Info & Statistics: contains link speed and mode information, as well as counters providing
detailed traffic statistics for each LAN port.
• Leases: contains information about devices currently connected to the LAN ports. If no device
is connected, this section is hidden.
• ARP entries: visible for operator account only, contains ARP table for the LAN ports. If no
device is connected, this section is hidden.
If only one LAN interface is available, then the area name is Summary. Otherwise, two areas are
displayed and the relevant interface name is shown in parentheses following the Summary title.
