ICONICO WC 2, Инструкция по установке и эксплуатации

Страница: 21 / 34

21
Installation and user manual WC2
SPA
Strong & weak massage
Cool & warm massage
Children wash
Energy-saving
Night light
Deodorization
Long press the [SPA] button for more than 2 seconds to start SPA function when the
user is seated
Long press the [rear wash] key to start the washing cycle
Short press the [Stop] button to stop the SPA function, whenever you want. Otherwise,
it will continue cleaning for about 5 minutes, followed by the drying function
automatically.
Once started, press it for a second time to activate the strong and weak massage the
water pressure will modulate between strong and weak pressure.
Long press the [Front wash] button to turn on/off the cool & warm massage when
the user is seated. The water temperature starts fluctuating between low and high
temperatures.
Long press the [User] button for more than 2 seconds while the child is seated. The
cleaning arm will be extended to the adequate position and the water will have the
proper pressure and temperature. The washing cycle will stop automatically after 90
seconds.
Note: Any settings can't be adjusted when this function starts.
Press and hold the [Set] button, then press the [Night Light] button to turn on/off
the energy-saving. When the energy-saving mode is on, the side knob light will turn
green. When the mode is off, the side knob light will turn white. The seat temperature
will keep in a range between 25 º C and 36 º C adapting to the environment
temperature or to the user settings whenever this is lower than the resulting
temperature. lt will go back to the temperature set by the user after exiting the energy
saving mode.
Note: The energy-saving function intends to low down the seat temperature when
nobody uses the toilet.
Press the [Night light] button in the remote to turn on/off this function. When turning on
the function, the gear position button on the remote lights up and the toilet's internal
light will turn on. Press the button once more to turn off the function.
The deodorization function starts after the user is seated.
The deodorization function stops for around 60 seconds after the user leaves the seat.
When the user is seated and it’s not using the cleaning or drying functions, short press
the [Stop] button to stop the deodorization function.