ICONICO WC 2, Инструкция по установке и эксплуатации

Страница: 13 / 34

13
Installation and user manual WC2
4.3.3 Affixing the toilet
4.3.4 Battery installation
Once the toilet is connected to the sewage and properly placed, smear the adequate type of
silicone all along the gap between the bottom of the ceramics and the floor to prevent water
seepage.
1. Take the cable out from the rear housing provided by the ceramics, as shown in the
illustration (the cable package is attached in the back of the product, peel it off gently).
2. Connect the waterproof DC power plug and tighten the waterproof cap.
3. Put the battery case in the proper position as the illustration.
The plugs on the battery cable have polarity. Make sure that the parts are properly
oriented and do not force them if they are not fitting easily. Otherwise the product will
be damaged. In case of any doubt, please contact the technical service.