ICONICO WC 2, Инструкция по установке и эксплуатации

Страница: 28 / 34

28
www.iconico.es
Drying/air temperature
Seat temperature
Remote
Flushing
Fault Failure analysis Solution
Drying with cold air Check the air temperature setting Adjust the air temperature
according to the manual
Fault Failure analysis Solution
No seat heating/low
temperature
Check seat temperature setting Adjust the seat temperature
according to the manual
Fault Failure analysis Solution
Remote failure Low battery power Replace the old battery
Check if there’s any water inside the
remote
Dry the water with a dry
cotton cloth
Fault Failure analysis Solution
Flush is not
cleaning properly
as the water
pressure seems to
be low
Angle valve filter blocked Clean the filter according
to the manual
Water pressure is too low The water flow is under 10L
for 30s (A booster pump
should be needed)
Water inlet pipe bent Ensure that the flexible
pipes allow the water to flow
properly
The water pressure
seems to be normal
but the flush is not
effective and there’s
no cleaning jet
The outlet has air leakage Contact the technical service
The S exhaust pipe is blocked Use a toilet plunger
The water pressures
seems to be normal
but the flush is not
working
Check if the angle valve is closed Open the angle valve
Flush valve failure Contact the technical service