44
11
DIGITAL MODE OPERATION
D
D
Station call sign programming
Station call sign must be programmed for the specified sta-
tion call as well as repeater operation in both digital voice and
low-speed data communications.
q
Push [A•
FUNC
] and [0•
OPT
] to enter
OPTION SET MODE
, then
push [
Y
Y
] or [
Z
Z
] several times to select the call sign select
mode.
• “yUC” appears for station call sign.
w
Push and hold [0•
OPT
] for 1 sec. then rotate [VOL] to se-
lect the desired call sign channel.
e
Push [
Y
Y
] to select call sign programming mode.
• The 1st digit blinks and channel indication stops blinking.
r
Rotate [VOL] to select the desired character or code.
• Push [
Z
Z
] or [
Y
Y
] to move the cursor to left or right, respectively.
t
Push [
Y
Y
] to select 2nd digit, then rotate [VOL] to select
the desired character or code.
• 2nd digit blinks (1st digit stops blinking).
• Repeat this step for programming station call sign.
y
Push [0•
OPT
] to save the call sign.
u
Rotate [VOL] to select an another channel from “C1” to
“C6.”
i
Repeat steps
w
to
u
to program another station call sign
channels.
✔
For your information:
Station and/or repeater call sign can be programmed from
Received call record when a call is received.
See page 46 for details.
