32
8
SCAN OPERATION
■
Skip channels
In order to speed up the scan rate, you can select memory
channels you don’t wish to scan as skip channels.
q
Push [C•
MR
] to select memory mode, if necessary.
• “
X
” appears.
w
Select a memory channel to set as a skip channel.
e
Push [A•
FUNC
] and [6•
SKIP
] to toggle the skip setting ON
and OFF.
• “SKIP” appears when the channel is set as a skip channel.
■
Priority watch
Priority watch checks for signals on “priority channels” while
operating on a VFO frequency.
D
Memory or call channel watch
While operating on a VFO frequency, memory or call channel
watch monitors for signals in the selected memory or call
channel every 5 sec.
q
Select the desired memory channel or the call channel.
w
Push [D•
CLR
] to select VFO mode.
e
Push [A•
FUNC
], then push [7•
PRIO
] to start watching.
• VFO is displayed, then the decimal point “.”, on the frequency
readout blinks.
• The priority channel is monitored every 5 sec.
• When the signal is detected on the priority channel, the watching
is suspended according to the setting of the scan resume condi-
tion.
r
Push [D•
CLR
] to stop watching.
5 sec.
50 msec.
VFO frequency
Memory channel
Push
“SKIP” appears
SKIP
FUNC
A
6
