23
6
MEMORY/CALL OPERATION
6
■
Channel name programming
q
Select a “Channel Name Indication” type in
INITIAL SET
MODE
(p. 65).
w
Push [C•
MR
] to select memory
mode, if necessary.
e
Push [A•
FUNC
], then push [8•
SET
]
to enter into the channel name
programming mode.
• The character to be edited blinks.
r
Rotate [VOL] to select a charac-
ter.
t
Push [
Y
Y
] to move the cursor to right, [
Z
Z
] to move the cur-
sor to left.
• Up to 5 characters can be used for channel name.
• Usable characters are A–Z, 0–9, “space,” +, –, =,
✱
, /, [, ] and :.
y
Push [
✱
•
ENT
] (or [D•
CLR
]) to set the name and exit the
channel name programming mode.
■
Memory transfers
This function transfers a memory channel’s contents to VFO
(or another memory/call channel). This is useful when search-
ing for signals around a memory channel frequency and for
recalling the offset frequency, subaudible tone frequency etc.
D
Memory/call
➾
VFO
q
Select the memory (call) channel
to be transferred:
➥
Push [C•
MR
] (or [B•
CALL
]) to
select memory (call) mode.
➥
Push [
Y
Y
] or [
Z
Z
] to select the
memory channel.
• When [VOL] is assigned as tuning
dial, rotate [VOL] to select the
memory channel. (pgs. 14, 65)
w
Push [A•
FUNC
], then push and
hold [C•
MR
] for 1 sec. to transfer
the selected memory contents to
the VFO.
• VFO mode is selected automatically.
FUNC
A
MR
C
CALL
B
FUNC
A
MR
C
SET
8
[VOL]
ENT