30
SCAN OPERATION
8
■
Programmed scan
Programmed scan repeatedly scans between two user pro-
grammed frequencies (memory channels “1A–3A” and
“1b–3b”) or scans between upper and lower band edges. This
scan is useful for checking for signals within a specific fre-
quency range such as repeater output frequencies, etc.
Scans between lower (start) and high (stop) frequency.
q
Push [D•
CLR
] to select VFO mode, if necessary.
w
Push [A•
FUNC
] and [5•
SCAN
] to start the scan, then a se-
lected scan edge appears as “P1,” “P2,” “P3” or “AL.”
• To change the scan edge, push [A•
FUNC
] and [8•
SET
] several
times until the desired scan edge appears.
• “AL” for full scan, “P1”, “P2” and “P3” for programmed scan be-
tween the programmed scan edge channels as “1A”–“1b,”
“2A”–“2b” and “3A”–“3b.”
• To change the scan direction, push [
Y
Y
] or [
Z
Z
].
• When [VOL] is assigned as tuning dial, rotate [VOL] to change
the scan direction. (pgs. 14, 65)
e
Push [D•
CLR
] to stop the scan.
Push
SCAN
FUNC
A
5
PROGRAMMED SCAN
MEMORY (SKIP) SCAN
PRIORITY WATCH
Band
edge
Band
edge
Start
1A
2A
3A
End
1b
2b
3b
Scan edges
Scan
Jump
SKIP
SKIP
SKIP
Mch 1
Mch 0
Mch 2
Mch 3
Mch 3
Mch 4
Mch 5
Mch 10
Mch 199
Mch 9
Mch 8
Mch 7
Mch 6
Mch 1
Mch 2
Mch 3
Mch 4
Mch 5
Mch 199
Mch 6
VFO frequency
145.20 MHz
VFO frequency
145.20 MHz
5 sec.
50 msec.
5 sec.
50 msec.
Priority channel
Priority channels
Memory
scan
Priority memory channel watch
Priority memory channel scan
Programmed scan P1 scans between 1A and 1b, P2 scans be-
tween 2A and 2b, and P3 scans between 3A and 3b frequencies.
■
Scan types
