55
7
MEMORY PROGRAMMING
New2001
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
D
New CH programming
q
Push [
r
] or [
s
] (or rotate [DIAL]) to select the desired
information.
Selectable information:
• FREQ
• DUP
• OFFSET
• TS
• MODE
• ATT
• SKIP
• PRIO
• STOP BEEP • TONE
• TSQL FREQ • DTCS CODE
• DTCS P
• VSC
FREQ, OFFSET
q
Push [ENT MW] (or [
w
]) to enter the frequency input.
w
Edit the desired frequency with keypad (pgs. 20, 21).
Other information
(DUP, TS, MODE, ATT, SKIP, PRIO, STOP BEEP, TONE,
TSQL FREQ, DTCS CODE, DTCS P, VSC)
q
Push [ENT MW] (or [
w
]) to edit the setting state.
w
Push [
r
] or [
s
] to select the desired setting, then
push [ENT MW].
w
Push and hold [ENT MW] for 1 sec. to program the chan-
nel and return to the frequency indication.
• 1 short and 1 long beep sound.
■
Memory channel selection
Memory channel can be selected during scan holding state.
q
Push [SCAN] to start a scan, then push [HOLD V] to hold
the scan.
w
Push and hold [
v
] or [
w
] for 1 sec. to select the desired
category.
e
Push [No. DIAL] and the assigned number to call the de-
sired memory name in the category directly.
• If the memory number is not assigned to the memory name,
skip this step. (See p. 54 for number programming details.)
When the assigned number is 0 to 9;
➥
Push a number then push [ENT MW] to call the number.
When the assigned number is 00 to 99;
➥
Push 2 digit number then push [ENT MW] to call the number.
When the assigned number is 000 to 999;
➥
Push 3 digit number to call the number.
NO. 4
NO. 24
NO. 127
MW
ENT
4
MW
ENT
4
2
1
7
2
r
Rotate [DIAL] to select the channel.
