New2001
51
7
MEMORY PROGRAMMING
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
y
Push [
r
] or [
s
] (or rotate [DIAL]) to select the desired
name or “ADDITION,” then push [ENT MW].
• When “ADDITION” is selected, new name can be programmed
in the group (see p. 54 for new name programming details).
u
Push [
r
] (or rotate [DIAL]) to select “ADDITION,” then
push [ENT MW].
• After “ADDITION” is selected, new channel can be programmed
in the name (see p. 55 for new channel programming details).
i
After all data are programmed, push and hold [ENT MW]
for 1 sec. to store the channel and return to frequency dis-
play.
What is DIRECT KEY? (pgs. 52, 53)
The IC-RX7 has a total of 100 direct keys in the same
category (0 to 99). Direct key is used to turn the link
setting ON/OFF for the assigned category or group during
link scan.
q
Push [SCAN] to start the link scan.
• Scan pauses when a signal is received.
• Rotate [DIAL] to restart the scan.
w
Push [HOLD V] to hold the scan.
➥
Push a numeral key (0 to 9) to the link setting ON
or OFF for the category or group which assigned a
direct key (0 to 9).
➥
Or push [• ATT] and a numeral key (0 to 9), then
push [ENT MW] to the link setting ON or OFF for
the category or group which assigned a direct key
(0 to 9).
➥
Or push [• ATT] and 2 digit number (00 to 99) to
the link setting ON or OFF for the category or group
which assigned a direct key (0 to 99).
