New2001
54
7
MEMORY PROGRAMMING
New2001
D
New NAME programming
q
Push [
r
] or [
s
] (or rotate [DIAL]) to select the desired
information.
Selectable information:
• NAME
• SKIP
• NUMBER
• NEXT (Edit CH programming)
NAME
q
Push [ENT MW] (or [
w
]) to edit the name program-
ming.
w
Rotate [DIAL] to select the desired character.
• Push [
r
] or [
s
] to select the character group from “ABC”
(alphabetical characters; capital letters), “abc” (alphabetical
characters; lower case letters), “123” (numbers) or “!”#” (sym-
bols). See previous page for available characters details.
• Push [
v
] or [
w
] to move the cursor left or right, respectively.
• Push [CLR SQL] to clear the selected character.
• Push and hold [CLR SQL] to repeat clearing continuously.
SKIP
q
Push [ENT MW] (or [
w
]) to edit the setting state.
w
Push [
r
] or [
s
] to select the desired setting, then
push [ENT MW].
NUMBER
q
Push [ENT MW] (or [
w
]) to enter the number input.
w
Edit the desired 1 to 3 digit number with keypad.
• Duplicated number can not be assigned in the same cat-
egory.
• 0 to 9, 00 to 99, 000 to 999 can be assigned. Pushing
[ENT MW] requires for 1 or 2 digit numbers input.
w
Push [
s
] (or rotate [DIAL]) to select “NEXT,” then push
[ENT MW] to enter the CH programming state.
Or push and hold [ENT MW] for 1 sec. to program the
memory channel and return to the frequency indication.
• 1 short and 1 long beep sound.
