109
14
TROUBLESHOOTING
The transceiver does not turn ON.
z
There is a bad connection to the power supply.
→
Check the connection to the transceiver and power supply. (p.98)
z
The fuse is blown.
→
Repair the problem, and then replace the fuse. (p. 96)
Little or no sound comes from the speaker.
z
The squelch level is set too high.
→
Set the squelch to the threshold point. (p. 12)
z
The volume level is set too low.
→
Set the volume level to a suitable level. (p. 12)
You cannot transmit with high power.
z
Some channels are set for low power or receive only by regulations.
→
Change channels. (p. 10)
z
The output power is set to low.
→
Push
HI/LO
to select high power. (p.7)
Scan does not start.
z
More than 2 favorite channels are not set.
→
Set at least 2 favorite channels. (p.17)
No beep sounds.
z
The Key Beep function is OFF.
→
Turn ON the function. (p. 82)
Individual or Group ID cannot be set.
z
The entered ID code is incorrect. The fi rst digit must be set to between ‘1’ and ‘9’ for an
Individual ID.
→
Enter a correct ID code. (p. 19)
“??” blinks instead of the position and time.
z
Four hours have passed since you manually entered the position.
z
The GPS position is invalid.
→
Enter the position and time. (p. 20)
“No Position” and “No Time” are displayed instead of the position and time.
z
The GPS antenna is not correctly connected.
→
Check the GPS antenna connection. (p. 97)
→
Check the cable connection to NMEA In/Out leads. (p.97)
z
The position and time have not been manually entered.
→
Enter the position and time. (p. 20)
Sensitivity is too low, and only strong signals can be heard.
z
The antenna is defective or the coaxial cable connector is shorted or cut.
→
Repair the problem and then reconnect to the antenna connector. (p.97)
Communication cannot be established.
z
The antenna is defective or the coaxial cable connector is shorted or cut.
→
Repair the problem and then reconnect to the antenna connector. (p.97)
Содержание IC-M510
Страница 128: ......
Страница 132: ...1 1 32 Kamiminami Hirano ku Osaka 547 0003 Japan A7625D 1EX 3 Printed in Japan 2021 Icom Inc Sep 2021 ...