manualshive.com logo in svg

Icom IC-M510, Инструкция по эксплуатации

Поделиться
Скачать
Icom IC-M510 Скачать руководство пользователя страница 110

97

12

CONNECTIONS AND MAINTENANCE

w

q

r

e

t

y u

i

 

■

Connections

1 

GROUND TERMINAL

   Connects to a vessel ground to prevent 

electrical shocks and interference from 

other equipment occurring.

  Use a PH M3 × 6 screw (user supplied).

2 

ANTENNA CONNECTOR

   Connects to a marine VHF antenna with 

a PL-259 connector. 

A key element in the performance of any 

communication system is the antenna. 

Ask your dealer about antennas and the 

best place to mount them.

CAUTION:

 Transmitting without an 

antenna may damage the transceiver.

3 

COMMAND MICROPHONE CONNECTOR

   Connects the optional command 

microphone.

4 

MICROPHONE CONNECTOR

   Connects the supplied or optional 

microphone.*

  * Not usable when the microphone is 

connected to the connector on the front 

panel.

5 

GPS ANTENNA CONNECTOR

   Connects to an optional GPS antenna. 

NOTE: 

 •The GPS sentences input from this 

connector takes precedence to over 

the sentences input from the built-in 

GPS receiver.

 •Be sure the GPS antenna is 

positioned where it has a clear view 

to receive signals from satellites, and 

fixed using the double-sided adhesive 

pad supplied with the antenna.

6 

NMEA IN/OUT LEADS

  Yellow: Listener A (Data-H), Data In (+)

  Green:  Listener B (Data-L), Data In (–)

   Connect to the NMEA output lines of a 

GPS receiver for position data.

 •NMEA 0183 (ver. 2.0 or later) sentence 

format RMC, GGA, GNS, or GLL 

and VTG compatible GPS receiver is 

required. Ask your dealer about suitable 

GPS receivers.

 •The GPS sentences input from this 

connector are given priority to over the 

sentences input from the built-in GPS 

receiver.

 •The AIS information through the AIS 

device inputs as VDM sentence. 

 

L

The data communication speed (baud 

rate) is fixed at 38400 bps. Set the 

NMEA 0183 item to “38400 bps.” 

 

(p. 85)

 •For the versions with the AIS receiver, 

the external VDM sentence takes 

precedence over the inputs from the 

built-in AIS receiver.

Содержание IC-M510





































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды