manualshive.com logo in svg

Icom IC-M510, Инструкция по эксплуатации

Поделиться
Скачать
Icom IC-M510 Скачать руководство пользователя страница 51

38

1

7

4

10

15

18

2

8

13

5

11

16

3

9

14

6

12

17

DIGITAL SELECTIVE CALLING (DSC)

7

 

■

Receiving DSC calls (other)

The transceiver receives the following types of DSC calls.

 •Individual call (p. 38)

 •

Individual Acknowledgment (p. 26)

 •Group call / All Ships call (p. 39)

 •

Position Request call (p. 40)

 •

Test call / Position Report call (p. 41)

 •

Test Acknowledgment / Position Reply call / Polling Reply call (p. 42)

 

L

The receivable call types may diff er, depending on the transceiver version or presetting.

By default, the Auto ACK function automatically sends an Acknowledgment to the calling 

station. ( [MENU] > Settings > DSC > 

Auto ACK

 (p. 46))

If Auto ACK is set to “Manual,” you can manually send an Acknowledgment for each call 

as described in this section.

 

D

  Receiving an Individual call

When an Individual call is received:

 •An alarm sounds.

 •

“Received INDV Call” is displayed.

1.  Push 

Alarm OFF

 to turn OFF the alarm.

2. 

Push the Software Key below the next operation.

Ignore

:

Ignores the call and returns to the operating 

screen.

 •The call is saved in the DSC Log.

 •“ ” blinks continuously until you display 

the call message.

Hold

:  Holds the RX call task, and returns to the 

Main screen.

Able

:

( Able  to 

comply)

Sends an Individual Acknowledgment right 

away.

 •

Automatically switches to the assigned 

channel.

 •After sending, push 

Resend

 to resend.

 •The call is saved in the DSC Log.

Accept

:

Accepts the call.

 •The call is saved in the DSC Log.

 •The received call’s information is 

displayed.

 •

Push the Software Key to select the 

Acknowledgment option.

STBY

: 

Puzsh to delete the task and returns to the Main screen.

ACK Able

:

(Able to Comply)

Sends an Acknowledgment without any changes.

ACK Unable 

:

(Unable to Comply)

Sends an Acknowledgment but cannot communicate.

ACK New CH 

:

(Propose New CH)

Able to communicate but proposes another channel. 

Specify the channel by pushing [▲] or [▼]. 

Содержание IC-M510





































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды