Icom IC-M510 Скачать руководство пользователя страница 102

Страница: 102 / 132

WLAN SeTTING

Client mode

The IC-M510/IC-M510e works as a client device in an existing wireless network. In this case,

the IC-M510, CT-M500, and your mobile devices must belong to the same wireless network.

Use the Client mode, if the connection is failed or poor when using the Access Point mode.

IC-M510/IC-M510e

RS-M500

Access point (User supplied)

CT-M500

Required information on joining your WLAN

•SSID (Network name)

•Password

The Security type of the IC-M510/IC-M510e WLAN function is set to WPA2/WPA as default.

You may be required to change the Security type or the default gateway settings, depending on

your network environment. Ask your network administrator for details on your WLAN settings.

Installation overview

You can connect your mobile device or a CT-M500 to the IC-M510/IC-M510e through a

wireless LAN (WLAN) by the following steps.

Step 1 On the transceiver:

1. Turn ON the WLAN function (p. 88).

2. Select a WLAN connecting mode, the Access Point mode or the Client mode

(pp. 90, 94).

3. enter the required information on configuring the IC-M510/IC-M510e WLAN in the

Access Point mode or joining your WLAN in the Client mode.

Step 2

For the CT-M500 (p. 92):

1. Turn ON the CT-M500.

2. On the transceiver, open the “WLAN Setup” screen, and then select the CT-M500

that you want to connect to the transceiver.

•The transceiver starts setting up the CT-M500, and then automatically connects to the

CT-M500.

For the mobile device (p. 94):

The setting procedure depends on the mobile device model or its OS version.

1. Download the RS-M500 to your mobile device.

2. Open the wireless LAN setting screen of your mobile device, and then find the

access point name (SSID) that you set to your transceiver.

3. enter the password, and then join the mobile device to the wireless network.

4. Open the RS-M500 application.

The RS-M500 automatically searches and connects to the transceiver.

Содержание IC-M510





































































































































Результаты поиска

Содержание IC-M510

Отзывы:

Бренды по названию

Популярные бренды

Icom IC-M510, Инструкция по эксплуатации

Результаты поиска

Содержание IC-M510

Отзывы:

Бренды по названию

Популярные бренды