Icom IC-GM800 Скачать руководство пользователя страница 6

Страница: 6 / 100

2001 NEW

OPERATING RULES

• CALL PROCEDURE

Calls must be properly identified and the time limit

must be respected.

Give your call sign each time you call another

ship or coast guard station. If you have no call

sign, identify the station by giving your ship name

and the name of the licensee.

Give your call sign at the end of each

transmission that lasts more than 3 minutes.

You must break and give your call sign at least

once every 15 minutes during long ship-to-shore

calls.

Keep your unanswered calls short, less than 30

seconds. Do not repeat a call for 2 minutes.

5. Unnecessary transmissions are not allowed.

• PRIORITIES

1. Read all rules and regulations pertaining to

priorities and keep an up-to-date copy handy.

Safety and Distress calls take priority over any

other calls.

False or fraudulent Distress signals are prohibited

and punishable by law.

• PRIVACY

Information overheard but not intended for you,

cannot lawfully be used in any case.

Indecent or profane language is prohibited.

• LOGS

All Distress, Emergency and Safety calls must

be recorded in complete details. Log data activity

is usually recorded for 24 hours. Universal Time

Coordinated (UTC) is frequently used.

Keep adjustments, repairs, channel frequency

changes and authorized modifications affecting

electrical operation of the equipment in the

maintenance log. The entries requires signatures

by the authorized licensed technician performing

or supervising the work.

• RADIO LICENSES

(1) SHIP RADIO STATION LICENSE

You need a current ship radio station license before

using the transceiver. It is unlawful to operate a ship

radio station which is not licensed, but required to be.

If required, contact your dealer or the appropriate

government agency for a Ship-Radiotelephone

license application. This government-issued license

states the call sign which is your craft’s identification

for radio communication purposes.

(2) OPERATOR’S LICENSE

A Restricted Radiotelephone Operator Permit is

the license most often held by small vessel radio

operators when a radio is not required for safety

purposes.

If required, the Restricted Radiotelephone Operator

Permit must be posted or kept with the operator. If

required, only a licensed radio operator may operate

a transceiver.

However, non-licensed individuals may talk over a

transceiver if a licensed operator starts, supervises,

ends the call and makes the necessary log entries.

A current copy of the applicable government rules

and regulations is only required to be on hand for

vessels in which a radio telephone is compulsory.

However, even if you are not required to have these

on hand it is your responsibility to be thoroughly

acquainted with all pertinent rules and regulations.

NOTE:

Before transmitting, monitor the channel you

want to use to avoid interrupting communications

already in progress.

Содержание IC-GM800





































































































Результаты поиска

Содержание IC-GM800

Отзывы:

Похожие инструкции для IC-GM800

Бренды по названию

Популярные бренды

Icom IC-GM800, Инструкция по эксплуатации

Результаты поиска

Содержание IC-GM800

Отзывы:

Похожие инструкции для IC-GM800

Бренды по названию

Популярные бренды