Icom IC-F9011, Руководство пользователя

Страница: 67 / 83

APCO P25 Trunking –
Clone Soft Setting
To create a new roaming area, point to the cell on
the [New] line which is located at the bottom of the
screen, then double click or right click to display the
Edit menu and click [Edit...Enter] to create a new
area.
•
Valid
This function validates entry into the roaming area.
•
Base Frequency (MHz)
Enter the lowest channel frequency that starts from
for the channel identifier. The frequency is used to
calculate a frequency of a control channel.
•
Channel Spacing (kHz)
Enter the channel spacing for each channel number.
y g
Select "ON" to validate the entry.
•
WACN ID
Enter the Wide Area Communications Network
(WACN) ID component of the Subscriber Unit (SU) ID
for the roaming area.
•
SYSTEM ID Enter the System ID component of the
•
Tx Offset Sign
Select the Tx Offset Sign from - (Minus) and + (Plus)
sign.
•
Tx Offset (MHz)
Enter the transmit frequency offset from the receive
frequency.
SYSTEM ID Enter the System ID component of the
Subscriber Unit (SU) ID for the roaming area.
•
Home System This function determines the roaming
area as the Home System.
Select "ON" for the Home System.
CH ID List
List Operation
•
Enable
This item determines valid CH ID Lists.
Select "Enable" to validate the CH ID List.
A total of 4 channel identifier list settings are
il bl available.
•
List
•
Valid
67
This function validates entry into the channel.
Select "ON" to validate the entry.