Icom IC-F9011 Скачать руководство пользователя страница 43

Страница: 43 / 83

APCO P25 Mode Operation

Receiving (Reviving the transceiver)

A Radio uninhibit signal revives the inhibited
transceiver.

When an inhibited transceiver receives a radio

uninhibit signal, the Busy/Transmit indicator does
not light because the Radio Inhibit is still activated.

An acknowledgement is automatically transmitted

Push [Digital Button] again to enter the Individual

ID selection mode.
• A pre-programmed ID name is displayed.
• When the ID name is not programmed,

the ID code is displayed.

An acknowledgement is automatically transmitted,

and the transceiver is revived and returns to
normal operation.

• The Busy/Transmit indicator lights red.

Push [CH Up] or [CH Down], or rotate

[CH Up/Down] to select the desired ID (or name).

• Push and hold [Digital Button] for 1 sec to

cancel and return to normal operation

▒

NOTE: If the transceiver is not revived even, after a

▒

radio uninhibit signal is received, cloning is

▒

cancel and return to normal operation.

• The ID can be edited with the 10-keypad*.

(Depending on the pre-set value.)
*10-key model only.

Push [PTT] to transmit the remote monitor signal

to the target station.

• The Busy/Transmit indicator lights red.
• “PLEASE WAIT” is displayed.

▒

required to revive it.

■

Remote Monitor function

Transmitting

A Remote Monitor function allows you to send a
signal that requires the target station to transmit
audio from the microphone.

p y

Release [PTT].

• “ACK RECEIVED” is displayed after receiving an

acknowledgement from the target station, and
then the transceiver returns to normal operation.

• Busy indicator lights green.
• “NO ACKNOWLDG” is displayed when an

acknowledgement is not received, and then the

[Digital Button] key assignment is necessary to
transmit the remote monitor signal.
(Not available on Non-display model)

Push [Digital Button] to enter the digital call type

selection mode.

Push [CH Up] or [CH Down], or rotate [CH

transceiver returns to normal operation.

Receiving

➥

When a remote monitor signal is received, the

transceiver automatically transmits an
acknowledgement and audio*.
*The audio is transmitted for a pre-set time

period.

Th B

it i di t light g

hil

Up/Down] to select “RDO MONITOR.”

•

The Busy/Transmit indicator lights green while

receiving, and lights red while transmitting an

acknowledgement or the audio.

✔

For Mobile transceivers operation:

When the optional SM-25 desktop microphone,
HM-152T or HM-148T hand microphone is
connected, the audio will not be transmitted.

Содержание IC-F9011




















































































Результаты поиска

Содержание IC-F9011

Отзывы:

Похожие инструкции для IC-F9011

Бренды по названию

Популярные бренды

Icom IC-F9011, Руководство пользователя

Результаты поиска

Содержание IC-F9011

Отзывы:

Похожие инструкции для IC-F9011

Бренды по названию

Популярные бренды