1
Push [Digital Button] to enter the digital call type
APCO P25 Mode Operation
4
Push [CH Up] or [CH Down], or rotate
[CH Up/Down] to select the desired ID (or name.)
selection mode.
▒
✔
Quick access
▒
Push [Phone] to enter the phone number
▒
selection mode directly. In this case, skip step
2
.
▒
Go to step
3
.
2
Push [CH Up] or [CH Down], or rotate [CH
Up/Down] to select “PHONE.”
[CH Up/Down] to select the desired ID (or name.)
• Push and hold [Digital Button] for 1 sec to
cancel and return to normal operation.
• The ID can be edited with the 10-keypad*.
(Depending on the pre-set value.)
* 10-key model only.
5
Push [PTT] to transmit the status query signal to
the target station.
Up/Down] to select PHONE.
• The Busy/Transmit indicator lights red.
• “PLEASE WAIT” is displayed.
6
Release [PTT].
• “STATUS QUERY” and the last transmitted
Status Message by the target station blinks.
• “NO ACKNOWLDG” is displayed when an
acknowledgement is not received, and then the
t
i
t
t
l
ti
3
Push [Digital Button] again to enter the phone
number selection mode.
• A pre-programmed phone number and text are
displayed.
transceiver returns to normal operation.
Receiving
▒
Not available on Non-display model.
➥
When a status transmitted Status Message is
automatically transmitted.
• The Busy/Transmit indicator lights green
while receiving, and lights red while
4
Push [CH Up] or [CH Down], or rotate
[CH Up/Down] to select the desired phone number.
• Push and hold [Digital Button] (or [Phone]) for 1
sec to cancel and return to normal operation.
transmitting an acknowledgement or the
Status Message.
• The function display does not change while
transmitting.
■
Phone call
Transmitting
• The phone digits (0 to 9, M and #) can be edited
with the 10-keypad*. (Depending on the pre-set
value.)
*10-key model only.
▒
To edit the Phone number with the 10-keypad:
▒
Input the phone number directly with the 10-
▒
keypad.
Transmitting
The transceiver can make a phone call that is
similar to standard phone calls. A transceiver and a
PSTN (Public Switched Telephone Network) can
access each other.
If no phone number is pre-programmed, the Phone
call function is not available.
[Digital Button] or [Phone] key assignment is
t t
it th Ph
ll
▒
keypad.
▒
• Push [Digital Button] (or [Phone]) to clear a
▒
code.
▒
▒
▒
▒
▒
▒
47
necessary to transmit the Phone call.
▒
Not available on Non-display model.
▒
▒
