➣
Un-matched (or matched) CTCSS is received.
*1 : Appears only when the external VOX unit is
Basic Operation
(Depending on the pre-set value.)
➣
Un-matched (or matched) NAC is received.*
(Depending on the pre-set value.)
➣
The selected channel is a ‘receive only’
channel.
*Digital mode operation only.
• Time-out timer
Af
i
i i
f
h
1 : Appears only when the external VOX unit is
connected.
*2 : This function is valid on the transceiver’s
revision 1.3 or later.
4
Push and hold [
W
] again to exit the user set
mode.
•Until power is turned OFF, [
W
], [
S
] and [
T
] is
not activated as the assigned key function.
After continuous transmission for the pre-
programmed time period, the time-out timer is
activated, causing the transceiver to stop
transmitting.
• Penalty timer
Once the time-out timer is activated, transmission
is further inhibited for a period determined by the
penalty timer
g
y
▒
NOTE : While in the user set mode, [
W
], [
S
]
▒
and [
T
] are activated as described above
▒
regardless of the assigned key function.
▒
User set mode is also available using a
▒
programmable key. See
4-1-3 Functions
▒
Programmable to Keys, User Set Mode Key
.
penalty timer.
■
User set mode
User set mode is accessed at power ON and allows
you to set seldom-changed settings. In this case you
can “customize” the transceiver operation to suit
your preferences and operating style.
▒
When o operate the Non displa model this
■
Clock function
The transceiver indicates the current time and date
when [ Clock ] is pushed. And you can change the
indication format and time/date settings.
▒
This function is not available on a Non-display
▒
model
▒
When you operate the Non-display model, this
▒
function is not available.
Entering the user set mode:
c
While pushing and holding [I] and
[II], rotate [VOL] to turn the power ON.
•Turn power OFF in advance.
•SET MODE appears for
[VOL]
▒
model.
▒
When you use the transceiver for the first time,
▒
or after the transceiver has sat unused for
▒
a long time, make sure to check the date and
▒
time indication after turning the power ON.
▒
If the time and date are not correct, reset them.
◇
Ti
d d
i di
i
1 sec at power ON.
2
Push and hold [
W
] to enter user
set mode.
[I]/[II]
◇
Time and date indication
1
Push [ Clock ] to indicate the current time and
date on the LCD.
•When the indication format is set to 12-hour,
“AM” or “PM” is indicated.
•The LCD indication returns to the stand-by
mode after 30 sec has passed with no
operation
3
Push [
W
] several times to select the appropriate
item. Then push [
S
] or [
T
] to set the desired
level/condition.
•Available set mode functions are
Backlight, LCD contrast, Beep,
Beep Level Ringer Level SQL Level
[
W
]
operation.
Time
Date
The time indication format (12-hour/24-hour)
34
Beep Level, Ringer Level, SQL Level,
AF Min Level, Mic Gain,
VOX Gain*1, VOX Delay*1,
Horn Battery Voltage, Signal
Moni, Lone Worker*2
and System info.
2
Push [Clock] again to return to the stand-by
mode.
[
W
]
[
S
]/[
T
]
Date indication format ( Y: Year, M: Month, D: Day )
