background image

10

VOICE RECORDER FUNCTIONS

10-2

 Recording a communication audio

This transceiver is equipped with a recorder not only 

for the receive audio, but also for transmit audio.

This function is useful to make a communication 

record. The recorded audio is saved onto a microSD 

card.

You can start recording by the key operation or the 

menu operation.

NOTE: 

 •

 To record a communication audio, a microSD card 

(user supplied) is required.

 •

 If your card does not have an “IC-F7010_F7510” 

folder, back up any data on the microSD card. Then 

insert it in the transceivers card slot and then format 

it using the transceiver's built-in format function. 

See page 9-4 for details.

 •

 Once the recording starts, will continue, after the 

transceiver is turned OFF and ON again.

 •

 The recording will continue until you turn OFF the 

function, or there is no more free space on the 

microSD card.

Depending on the presetting, if there is no more 

free space on the microSD card, the transceiver 

automatically deletes the fi les in the oldest folder to 

continue the recording.

 •

 When the recording time exceeds 10 minutes, the 

transceiver continues to record, but it records to a 

new fi le.

 •

 You can display the microSD card capacity, 

remaining capacity, and the time remaining for 

voice recording. See page 9-6 for details.

TIP: About recording

 •

 When the recording starts, a folder and fi le are 

automatically created on the microSD card.

L

  The folder name is date formatted yyyymmdd (yyyy: 

year, mm: month, dd: day).

L

  The fi le name is date formatted yyyymmdd_hhmmss 

(yyyy: year, mm: month, dd: day, hh: hour, mm: 

minute, ss: second).

L

  The audio fi les recorded on the same day are saved 

in the same folder.

 •

While recording, “ ” blinks. 

 •

While standing by, the recording pauses.

 •

While pausing, “ ” stops blinking.

 •

 “ ” is displayed when the microSD card has no 

free space and cannot record additional audio.

 

D

Recording

<Key operation>

1. 

 Push [Call Recorder] to turn ON the Call Recorder 

function.

  

 •

“ ” is displayed.

2. 

Push [PTT] to start recording.

 •

“ ” blinks while recording.

L

 The recording is performed when the mute is 

released.

3. 

 Push [Rec Call] again to turn OFF the Call 

Recorder function.

  

 •

“ ” disappears.

Содержание IC-F7010 Series

























































































































































Отзывы: