manualshive.com logo in svg

Icom IC-F7010 Series, Руководство по эксплуатации

Поделиться
Скачать
Icom IC-F7010 Series Скачать руководство пользователя страница 91

8

MDC 1200 SYSTEM OPERATION

8-3

4.   Push [Up] or [Down] to select “Status,” then push 

[OK].

  

5.    Select a Status call, then push [PTT] to transmit 

an MDC Status call.

  

 • “Success” is displayed after receiving an 

acknowledgment from the target station.

 • “Failed” is displayed if the target station does not send 

back an acknowledgment.

 Transmitting a call

 

D

 Transmitting a PTT ID call

You can transmit a call with your station ID.

When another station receives a PTT ID call, your 

station ID is displayed.

 Push [PTT] to make a call.

 •Beeps sound, depending on the presetting.

 • Your station ID is transmitted when you push [PTT] (at the 

beginning of the transmission) or release [PTT] (at the end 

of transmission), depending on the presetting.

 

D

 Transmitting an MDC Emergency call

An MDC Emergency call can be transmitted in 

the same way as the 2-Tone or APCO P25 mode 

operation. See “Emergency call” for details. (pp. 4-3 ~ 

4-6)

The transceiver can also be set to keep the 

microphone open in the Emergency mode to monitor 

the situation, depending on the presetting.

 

D

  Transmitting an MDC Emergency 

Acknowledgment

When receiving an MDC Emergency call, an MDC 

Emergency Acknowledgment is automatically 

transmitted, depending on the presetting.

 

D

 Transmitting an MDC Status call

An MDC Status call enables you to send a preset 

Status call. There are 16 kinds of Status calls.

In addition, the transceiver can send an MDC Status 

Poll call that make the target station to automatically 

transmit a Status call, depending on the presetting.

(Menu > Signaling/Call > Call Menu > 

Status

)

1.  Push [Menu] to display the Menu screen.

2.   Push [Left] or [Right] to select “Signaling/Call,” 

then push [OK].

  

3.   Push [Up] or [Down] to select “Call Menu,” then 

push [OK].

 

TIP:

 

 • You can also transmit a Status call through “Call 

Menu.”

(Menu > Signaling/Call > Call Menu > 

Status

)

 • Push [Status] to directly display the “Status” 

screen in step 4 above.

 • Hold down [Status] for 1 second to transmit the 

preset Status call that is set in the “Status” screen.

Содержание IC-F7010 Series

























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды