Icom IC-F7010 Series Скачать руководство пользователя страница 62

Страница: 62 / 152

MENU SCREEN

6-10

Site Alias

Displays the RFSS ID and Site ID, or the Site Alias

name if entered. You can enter the Site Alias name on

the Site List screen.

Site Lock

Locks the transceiver in the current registered site.

This function inhibits the transceiver from roaming

other sites.

Site Select

Enter the site select mode.

Editing the RFSS ID:

1. While displaying the site, push [OK] to display its

RFSS ID and the Site ID.

2. Hold down [OK] to enter the editing mode.

3. Push [Up] or [Down] to set.

Connecting to the site:

1. Hold down [OK] to connect to the site.

2. While displaying the site, hold down [OK] to

connect to the site.

Site Change Beep

Select whether or not to sound a beep after

registration and group affiliation are successful in the

Trunking system.

Band Scan

Start or cancel the Band Scan.

This function cannot be used while scanning, transmitting,

or in the Conventional mode.

Internal Hunt List

Displays the Internal Hunt List.

Trunking (For only the revision 2.00 or later.)

Содержание IC-F7010 Series

























































































































































Результаты поиска

Содержание IC-F7010 Series

Отзывы:

Бренды по названию

Популярные бренды

Icom IC-F7010 Series, Руководство по эксплуатации

Результаты поиска

Содержание IC-F7010 Series

Отзывы:

Бренды по названию

Популярные бренды