7
APCO P25 MODE OPERATION
7-3
Transmitting a call
D
Transmitting an Individual call
Individual call enables to make a call to a specifi c
station, and it provides private communication.
(Menu > Signaling/Call >
Individual Select
)
1. Push [Menu] to display the Menu screen.
2. Push [Left] or [Right] to select “Signaling/Call,”
then push [OK].
3. Push [Up] or [Down] to select “Individual Select,”
then push [OK].
4. Select the target Individual station, then push
[PTT] to transmit an Individual call.
5. Hold down [PTT] to speak.
6. Release [PTT] to receive.
TIP:
Push [Individual] to directly display the
“Individual Select” screen in step 4 above.
D
Transmitting a Talkgroup call
A Talkgroup call enables to make a call to a specifi c
Talkgroup only.
The Talkgroup ID ‘65535’ is used for the All Call.
(Menu > Signaling/Call >
Group Select
)
1. Push [Menu] to display the Menu screen.
2. Push [Left] or [Right] to select “Signaling/Call,”
then push [OK].
3. Push [Up] or [Down] to select “Group Select,” then
push [OK].
4. Select the target Talkgroup, then push [PTT] to
transmit a Talkgroup call.
5. Hold down [PTT] to speak.
6. Release [PTT] to receive.
TIP:
Push [Group] to directly display the “Group
Select” screen in step 4 above.
APCO P25 mode operation enables you to make
a call to a specifi c station (Individual call) or to a
particular group (Group call). Other digital mode
transceivers on the channel will not receive a call that
does not match their Individual or Talkgroup ID and/or
Network Access Code (NAC).
NOTE:
If the following settings are confi gured
using the CS-F7500
programming
software
, the
Talkgroup ID (or name) is displayed:
• When the operating channel or zone is changed.
• When [PTT] is pushed.
• While receiving.
( Digital > Option > Talkgroup Option >
Talkgroup Display on Mode Change
,
Talkgroup Display on PTT
,
Talkgroup Display on Receive
)
NOTE:
If the following settings are confi gured
using the CS-F7500
programming
software
, the
Individual ID (or name) is displayed while receiving.
( Digital > Option > Individual Option >
Unit ID Display on Receive
)
( Digital > Option > Talkgroup Option >
Unit ID Display on Receive
)