Icom IC-F3160 SERIES, Руководство по эксплуатации

Страница: 8 / 46

5
2
BIIS 1200 OPERATION
■
Transmitting a call
A total of 3 ways for code selecton are avalable—selectng
the call code from memory, enterng the call code from the
keypad and callng back from the queue channel record.
D Using call memory
q
Durng stand-by operaton, push [BIIS Button] to enter
the call code memory channel selecton mode.
• “ ” appears.
TXCE CALL TXC BIIS
STATION1
0001
Appears
w
Push [CH Up] or [CH Down] to select the desred call
code.
e
Push [Call] or [PTT] * to call.
* PTT call can be made only when PTT call capablty s permt-
ted.
NOTE:
When no answer back s receved, the trans-
cever repeats the call 3 tmes (default) automatcally,
and
“
WAIT
”
s dsplayed durng each call. However, an
error beep sounds and “
FAILED
” s dsplayed when
no answer back s receved after the calls.
r
Push [PTT] to transmt; release to receve.
t
Push [Moni(Audi)] to send the ‘Clear down’ sgnal.
D Calling back from the queue channel
q
Durng stand-by operaton, push and hold [BIIS Button]
for 1 sec. to enter the queue memory channel selecton
mode.
<
QUEUE
>
–QUEUE!–
TXCE CALL TXC BIIS
w
Push
[CH Up]
or
[CH Down]
to select the desred record.
e
Push [Call] or [PTT] * to call.
* PTT call can be made only when PTT call capablty s permt-
ted.
NOTE: When no answer back s receved, the trans-
cever repeats the call 3 tmes (default) automatcally,
and
“
WAIT
”
s dsplayed durng each call. However, an
error beep sounds and
“
FAILED
”
s dsplayed when
no answer back s receved after the calls.
r
Push
[PTT]
to transmt; release to receve.
t
Push [Moni(Audi)] to send the ‘Clear down’ sgnal.