4
2
BIIS 1200 OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
D
Group call
q
When a group call s receved;
• Beeps sound.
• “ ” appears and the mute s released.
• The programmed text message (e.g.“
GROUP
”) and the callng sta-
ton ID (or text) s dsplayed when the ndcaton mode s 2 lnes.
• The programmed text message (e.g.“
GROUP
”) and the callng
staton ID (or text) s dsplayed alternately when the ndcaton
mode s 1 lne, dependng on the settng.
• “ ” appears or blnks dependng on the settng.
4001
1111
TXCE
CALL BIIS
TXC
Group ID
Calling station ID
Appears
Appears or
blinks
w
Push and hold
[PTT]
, then speak nto the mcrophone at
a normal voce level.
• TX ndcator lghts red.
NOTE:
Only one staton s permtted to speak.
e
Release
[PTT]
to return to receve.
• BUSY ndcator lghts green whle recevng a sgnal.
r
To finsh the conversaton, push
[Moni(Audi)]
to send the
‘Clear down’ sgnal.
• Ether staton can send a ‘Clear down’ sgnal.
• “
CLR DOWN
” s dsplayed for 2 sec. (approx.)
• “ ” dsappears and the transcever returns to stand-by operaton.
D
Displaying the received call record
— Queue indication
The transcever memorzes the callng staton ID n the mem-
ory. Up to 3 calls can be memorzed, and the oldest call re-
cord s erased when a 4th call s receved. However, once
the transcever s powered OFF, the all records are cleared.
q
Push and hold
[BIIS Button]
for 1 sec.
• Dsplays followng ndcaton.
When a record is available
<
QUEUE
>
–QUEUE!–
TXCE
CALL
TXC
BIIS
When no record is available
<
QUEUE
>
NO QUEUE
TXCE
CALL
TXC
BIIS
w
Push
[CH Up]
or
[CH Down]
to select the desred call.
e
Push and hold
[BIIS Button]
for 1 sec. agan to return to
stand-by operaton.
• When no operaton s performed for 30 sec., the transcever re-
turns to stand-by operaton automatcally.