![background image](http://html1.mh-extra.com/html/icom/ic-f3160-series/ic-f3160-series_operating-manual_4263117041.webp)
38
5
IDAS OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
D
Transmitting a Status Polling Call
The transcever can send a sgnal that causes the targeted
staton to automatcally transmt ts current status.
q
Push
[Digital Button]
to enter the applcaton selecton
mode.
• “
VOICE
” appears.
• To change the call type, push and hold
[Digital Button]
for 1 sec.
durng stand-by operaton. After changng, the transcever en-
ters the applcaton selecton mode automatcally.
w
Push
[CH Up]
or
[CH Down]
to select “
STAT POL
.”
e
Push
[Digital Button]
agan to enter the Indvdual ID se-
lecton mode.
• The pre-programmed ID name s dsplayed.
• When ID name s not programmed, ID code s dsplayed.
r
Push
[CH Up]
or
[CH Down]
to select the desred ID
name (or ID code).
• Dependng on the pre-settng, you can nput the ID drectly.
(10-key verson only) See p. 39 for detals.
STAT POL
STATION 1
DIGI STUP STDN
Individual ID name
is displayed.
t
Push
[PTT]
to transmt the status pollng to the selected
staton.
• “
STAT POL
” s dsplayed.
y
Release
[PTT]
.
• The status message s dsplayed when the targeted staton
send the status.
• “
POL FAIL
” s dsplayed f there s no acknowledgment from the
staton.
u
After a specfied tme perod has passed, the transcever
wll return to receve.