![background image](http://html1.mh-extra.com/html/icom/ic-f3160-series/ic-f3160-series_operating-manual_4263117009.webp)
6
2
BIIS 1200 OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
D
Direct code entry
q
Durng stand-by operaton, push
[TX Code Enter]
to
enter the TX code edt mode.
• Code dgt for edtng blnks.
TXCE
CALL
TXC
BIIS
0500
w
Push
[TX Code Enter]
to select the desred dgt to be ed-
ted.
• Dgt for edtng dffers accordng to the settng.
e
Set the desred dgt usng
[CH Up]
/
[CH Down]
or 10-key-
pad*.
* 10-key versons only
r
Push
[TX Code Enter]
to set the dgt, then the dgt to
the rght wll blnk automatcally.
• When the 10-keypad s used for settng, the dgt to the rght wll
blnk automatcally wthout pushng
[TX Code Enter]
.
t
Repeat
e
and
r
to nput all allowable dgts.
y
Push
[Call]
or
[PTT]
* to call.
* PTT call can be made only when PTT call capablty s permt-
ted.
NOTE:
When no answer back s receved, the trans-
cever repeats the call 3 tmes (default) automatcally,
and
“
WAIT
”
s dsplayed durng each call. However, an
error beep sounds and
“
FAILED
”
s dsplayed when
no answer back s receved after the calls.
u
Push
[PTT]
to transmt; release to receve.
i
Push
[Moni(Audi)]
to send the ‘Clear down’ sgnal.
For your information
When the “UpDate” settng for the call code s enabled, the
set code s overwrtten nto the call code memory.