35
5
IDAS OPERATION
D
Transmitting a Status Message
The transcever has the ablty to send a pre-programmed
status message.
There are 100 status messages that can be sent.
q
Push
[Digital Button]
to enter the applcaton selecton
mode.
• “
VOICE
” appears.
• To change the call type, push and hold
[Digital Button]
for 1 sec.
durng stand-by operaton. After changng, the transcever en-
ters the applcaton selecton mode automatcally.
w
Push
[CH Up]
or
[CH Down]
to select “
STATUS
.”
e
Push
[Digital Button]
agan to enter the status message
selecton mode.
• The pre-programmed status message s dsplayed.
r
Push
[CH Up]
or
[CH Down]
to select the desred mes-
sage.
STATUS
TX Status 01
DIGI STUP STDN
Pre-programmed
status message
is displayed.
t
Push
[Digital Button]
agan to enter the Indvdual or
Talkgroup ID selecton mode.
• The pre-programmed ID name s dsplayed.
• When ID name s not programmed, ID code s dsplayed.
y
Push
[CH Up]
or
[CH Down]
to select the desred ID
name (or ID code).
• Dependng on the pre-settng, you can nput the ID drectly.
(10-key verson only) See p. 39 for detals.
STATUS
STATION 1
DIGI STUP STDN
Individual or Talkgroup ID
name is displayed.
u
Push
[PTT]
to transmt the status message to the se-
lected staton or talkgroup.
• “
STAT TX
” s dsplayed.
i
Release
[PTT]
.
• “
STAT OK
” s dsplayed after recevng an acknowledgement
from the base staton.
• “
STA FAIL
” s dsplayed f there s no acknowledgment from the
base staton.
o
After a specfied tme perod has passed, the transcever
wll return to receve.
Convenient!
(10-key verson only)
Dependng on the pre-settng, you can use the quck status
message selecton/transmsson.
➥
Push the desred dgt key ([1] to [9] or [0]) to enter the
status message selecton mode.
• The approprate status message s dsplayed.
➥
Push and hold the desred dgt key ([1] to [9] or [0]) for
1 sec. to transmt the approprate status message 1 to 10.
