background image

10

2. ADVANCED OPERATIONS

Tracking function

While in the Dualwatch operation, and when different 
antennas are set to the Main and Sub bands, using 
this function enables you to hear which antenna has 
better reception.

1.  Push 

MENU

 to display the MENU screen.

2.   Touch [TRACKING] for 1 second to turn ON the 

Tracking function.

 

• The MAIN/SUB indicator blinks in blue.

3.   Push 

MAIN/SUB

 to select the operating band 

(Example: Main band).

 

• The MENU screen is closed.

L

 The Sub band’s operating frequency and mode are 

synchronized with the Main band’s.

L

 When using the RC-28, if the offset frequency is 
set between the Main band and the Sub band, the 
frequency changes with the offset amount when 
rotating 

MAIN DIAL

.

4.   Hold  down 

MAIN/SUB

 for 1 second to turn OFF the 

Tracking function.

The Tracking function will be canceled when:

 

• Starting a scan.

 

•  Changing the operating band, or directly entering the 

operating frequency on the Sub band.

 

•  Changing from the Memory mode and the VFO mode, 

vice versa, and so on.

TIP

: Setting the “MAIN/SUB Tacking [MAIN/SUB] 

Switch” item to ON enables you to turn ON the 
Tracking function by holding down 

MAIN/SUB

 for 1 

second. 

MENU

 » SET > Function >  

MAIN/SUB Tracking [MAIN/SUB] Switch

Содержание IC-7610






































































































Отзывы: